Categories

CONTACT US

Jiangsu Nosens Optic-Electric Technology Co.,Ltd
Add: Block A, Guanghua Science & Technology Park, Group 29#, Shili Community, Rucheng Street, Rugao-226500, Jiangsu, China
Tel:+86-513-87282008
Fax:+86-513-87282008
Ph:+8615371711866
E-mail:christine.li@nosens.cn

Precautions For Using MPO Fiber Optic Patch Cord

- Mar 19, 2018 -

Generally speaking, optical fiber jumper is an indispensable product between equipment and fiber optic wiring equipment. It is usually used in optical fiber communication system, optical fiber access network, optical fiber data transmission and LAN. But do you know what MPO optical fiber jumper is? What does it have to pay attention to when it is used?

1, MPO fiber jumper

As we all know, if we can manage MPO/MTP and other related products better, this will bring a lot of benefits to our work, but many people don't know what to pay attention to when using MPO optical fiber jumpers. For example, you can easily find the configured optical fiber jumpers, so that the maintenance of optical fiber jumpers will be much lighter and provide the correct bending radius protection. In the network rewiring, accessibility plays an important role, directly affecting the stability of the network and the cost of network rewiring.

Attention to the use of 2 and MPO fiber jumper lines

(1) pay attention to the bending radius of the optical fiber jump line. As usual, the bending radius of optical fiber jumper with diameter of 1.6mm and 3.0mm can not be less than 3.5mm, while the bending radius of MPO optical fiber jumper can not be less than 10 times its diameter.

(2) do not pull or squeeze the fiber jumper. When the optical fiber jumper is installed, excessive force may exert pressure on the fiber jumper and its two connectors, thus affecting its performance. It's important to note that if you need to use a lot of strength to pull a fiber jumper, there must be a problem in the middle.

(3), if the current optical fiber length is suitable for the current scene, so it can be reused with jumper, but you still need to put this jumper down from the fiber distribution frame, and then re install it again according to the new path of the root jumper, this is the only way to ensure no bending and no tie, jumper not under tensile compression. In order to effectively arrange optical fiber jumpers, we should find the most suitable path between two ports for optical fiber jumpers, and avoid jumpers from being intertwined and crowded.

(4), by binding method using optical fiber jumper might make the panel looks very neat, but if too tightly tied fiber jumper would be counterproductive, if you want to prevent this from happening, can be due to the optical fiber jumper relaxation, fiber jumpers can make activities in a limited range "".

(5) labeling is a very important thing, and is also one of the most important things for system administrators. Therefore, any management point (including wiring panel) needed to collect wiring infrastructure needs to be labelled accurately.

(6) check whether there is physical damage to the fiber-optic jumper, including the creases and connector damage caused by the protective sleeve bending.


Related Products