Categories

CONTACT US

Jiangsu Nosens Optic-Electric Technology Co.,Ltd
Add: Block A, Guanghua Science & Technology Park, Group 29#, Shili Community, Rucheng Street, Rugao-226500, Jiangsu, China
Tel:+86-513-87282008
Fax:+86-513-87282008
Ph:+8615371711866
E-mail:christine.li@nosens.cn

Sc To Lc Multimode Fiber Cable

Sc To Lc Multimode Fiber Cable

Sc To Lc Multimode Fiber Cables are used to make patch cords from the device to the fiber optic cabling link. There is a thicker protective layer, which is generally used for the connection between the optical transceiver and the terminal box.

Send InquiryChat Now

Product Details

Product Description

Sc To Lc Multimode Fiber Cables are used to make patch cords from the device to the fiber optic cabling link. There is a thicker protective layer, which is generally used for the connection between the optical transceiver and the terminal box.

Structure: Similar to coaxial cable, except that there is no mesh shield. The center is the glass core of light transmission. In a multimode fiber, the core has a diameter of 15 μm to 50 μm, which is roughly equivalent to the thickness of a human hair. The single-mode fiber core has a diameter of 8 μm to 10 μm. The outer core of the core is surrounded by a glass envelope having a lower refractive index than the core to keep the fiber in the core. Next to it is a thin plastic jacket to protect the envelope.

Note: The optical transceivers at both ends of the fiber jumper must have the same wavelength. The two ends of the fiber must be optical modules of the same wavelength. The simple distinction is that the color of the optical module must be the same. In general, short-wavelength optical modules use multimode fiber (orange fiber), and long-wavelength optical modules use single-mode fiber (yellow fiber) to ensure data transmission accuracy. Do not over-bend and wrap the fiber during use, which will increase the attenuation of light during transmission. After the fiber jumper is used, the fiber connector must be protected with a protective cover. Dust and oil can damage the coupling of the fiber. If the fiber connector is dirty, you can use a cotton swab to clean the alcohol, otherwise it will affect the communication quality.

Fiber optic patch Cord is the basic parts for optical transmission. They are consist of fiber optic cable and terminated connector.

Wolon has strong capacity and experience to support any large demand.

Features

· Good mechanical and environmental characteristics;
· Flame retardant characteristics meets the requirements of relevant standards;
· The mechanical characteristics meet the requirements of relevant standards;
· Soft, flexible, easy to splice, and with big capacity data transmission;

Applications:

Long-haul, Metro and Access System

Fiber CATV and Fiber Network System

image001.jpg

Hot Tags: sc to lc multimode fiber cable, China, manufacturers, suppliers, factory, customized, made in China

Previous:SC Single Mode Simplex Fiber Optic Jumper Next:Sc To Lc Single Mode Patch Cable

Related Products

Inquiry