Sc To Lc Fiber Patch Cable Single Mode
Product Detail: Patch cord is a product be used to interconnect Transmission equipment to the Fiber optic patch panel.The patented injection molding process provides each connection greater durability in resisting pulls,strains and impacts from cabling installing. Features: Low insertion loss,...Send InquiryChat Now
The use of small concentricity errors and high-precision ceramic ferrules with internal bore diameters provides additional insertion loss and return loss, avoiding transmission degradation and damage to optical transceivers.
Using advanced grinding technology and grinding equipment, the technical parameters such as the center-of-grain grinding offset of the optical fiber, the concave of the optical fiber and the radius of curvature of the ceramic end face are all in compliance with the prescribed standards.
In order to ensure the long-term use of the connector, not only the joints are subjected to attenuation and back reflection tests, but also the precision interferometer is used to test the scratches or flaws on the joint surface, and the curvature of the FC, ST, SC, LC and MU joints is measured. , grinding offset, fiber sag and protrusion amount to ensure joint quality.
100% optical full detection, each jumper is guaranteed to have good grinding quality and excellent performance indicators.
It can be configured as different core types such as single core, double core or multi core according to customer's requirements. Fiber optic products also have different fire ratings for PVC and LSOH, providing design flexibility.
The insertion loss is small, the return loss is large, the interchangeability, the repeated insertion and removal performance are excellent, and the use is convenient.
Meets ANSI / TIA / EIA and ISO / IEC requirements for durability, moisture resistance, coupling stress, fiber tensile force and adaptability to harsh environments such as humidity, extreme temperatures, insertion force and cable tensile stress, impact and vibration.
Patch cord is a product be used to interconnect Transmission equipment to the Fiber optic patch panel.The patented injection molding process provides each connection greater durability in resisting pulls,strains and impacts from cabling installing.
Low insertion loss, high return loss
High dense connection, easy for operation
High credibility and stability
Good in repeatability and exchangeability
1.Local Area Network (LAN)
2.Data communication network
3.Telecommunication optical transmission network
4.Optical access network(OAN)
5.Active device termination
6.Fiber optics data transmission(FODT)